Home  |  Products  |  Downloads  |  Online Order  |  Support  |  F.A.Q.  |  Customer Service  |  Contact Us

 Smart1DCutting Frequently Asked Questions

1. How do I know if Smart1DCutting is right for me?
2. How do I install Smart1DCutting?
3. How do I register or purchase Smart1DCutting?
4. How is the Commercial version different from the Evaluation version?
5. Can I use inches instead of millimeters?
6. Can I specify my custom material types?
7. How do I calculate the cutting layout?
8. How do I change the Saw Kerf thickness?
9. Can I print part labels?
10. Can I disable certain columns which I don't use?
11. Can I use different panel sizes in a job?
12. My computer crashed. How do I reinstall Smart1DCutting?
13. How do I make a backup of my data? / How do I restore my backed up data?
14. I'm having trouble importing a .CSV file.
15  How do I change the working cost currency ?
16  How do I setup multiple workstations to use a common database ?

   
   
How do I know if Smart1DCutting is right for me?

An evaluation version of Smart1DCutting is available for free downloading from this web page. The best way to determine if Smart1DCutting is for you is to use it. We encourage you to evaluate Smart1DCutting prior to making a financial investment.

  • Only you can decide if Smart1DCutting has the right set of features for you
  • The evaluation copy of Smart1DCutting is fully functional.
    The only limitation is the number of parts that can be optimized at once, which is 30 parts.
  • It is your responsibility as a user of software distributed as Shareware/Freeware to evaluate the product to verify that Smart1DCutting meets all your requirements
Back to top
   
How do I install Smart1DCutting?

Download and save the automated installation program to your computer. Then click on the install file, Smart1DCuttingDEMO_setup.exe to install Smart1DCutting. Smart1DCutting will run properly only after being installed from the installation program.


Back to top
   
How do I register or purchase Smart1DCutting?

You can only purchase Smart1DCutting on our web site. Please visit our secure online order page.


Back to top
   
How is the Commercial version different from the Evaluation version?

The free Evaluation version has printing disabled and the parts limit is 10.000 per job for the first 30 days.
By purchasing a license, all limitations are removed and the parts limit per job can be set to 100, 1.000, 10.000 or to Unlimited, depending on the license purchased.


Back to top
   
Can I use inches instead of millimeters?

  • You can use any measurement unit with Smart1DCutting
  • You can use inches, mm, cm, dm, M, or feet
  • Smart1DCutting let you enter project dimensions in one unit and display them in a different unit. (For. ex.: enter dimensions in mm and have them displayed in inches)

To change the measurement units select Options -> Settings from the main menu. Then choose the "Units" tab and make your selection.


Back to top
   
Can I specify my custom material types?

Yes. You can add your custom material types. To add a new material type or to edit existing ones select Edit -> Materials from the main menu.

Back to top
   
How do I calculate the cutting layout?

Highlight the project name you want to optimize by clicking on it, then click the "Optimize" button or press the F7 key on your keyboard. Smart1DCutting's optimizer will be activated and produce the cutting layout.

Back to top
   
How do I change the Saw Kerf thickness?

From the main menu select Edit -> Materials. In the "Materials" grid, look for the "Saw Width" column. Set the desired saw kerf thickness for each material type in the list.

Back to top
   
Can I print part labels?

Smart1DCutting can print labels for parts, sources and reusable offcuts. To print labels select "Labels" tab in the main window and select the label style you want to use from the available label styles list. You can also define your custom label appearance.

Back to top
   
Can I disable certain columns which I don't use?

Yes. You can hide the following columns in all data grids: "Notes", "Part code", Left angle", "Right angle" and "Works". To enable/disable a certain column select "View -> Columns" from the main menu and check/uncheck the desired column(s).

Back to top
   
Can I use different source sizes in a job?

Yes. You can use many different size sources in a single job. You can also use different materials in a single job, Flat Bar and PVC Pipe for example.

Back to top
   
My computer crashed. How do I reinstall Smart1DCutting?

Simply re-install the software as you did originally and follow the steps in the activation wizard to activate your copy of the software. Activation is totally secure and anonymous. No personal info is required. There are 2 activation methods: online and offline.

Please feel free to contact us anytime with your Serial Number and Computer ID in case you need assistance with the activation process.


Back to top
   
How do I make a backup of my data? / How do I restore backed up data?

From the main menu select Options -> Settings, then go to "Database" tab.

To create a backup of the database click the "Database backup..." button and after selecting the desired location on disk click "Save". The backup filename will be named based on the current date and time for easier identification when it comes to restore it.

To restore a previously created database click the "Database restore..." button and after selecting the desired backup filename click "Open". During database restore, all current database files are removed and replaced with files from the database backup.


Back to top
   
I'm having trouble importing a .CSV file

To import parts data from a CSV file select "Sources -> Import..." or "Parts -> Import..."

A new window showing the content of the CSV file will open.

Select the character used as a field delimiter: comma (,), semicolon (;), tab, space or other. Please click the "Refresh" button after changing a field delimiter to reload and parse the CSV file content using the new field delimiter.

To change the name of a particular column in order to match its data click the column header to open the "Available fields" popup window. Select a new name for the column and click "OK". To prevent a column from being imported set its name to "None".

Finally, to import the data into the sources/parts grid click the "OK" button at the bottom of the import window.


Back to top
   
How do I change the working cost currency ?

The working cost currency is based on the regional settings in your operating system.

In windows XP you can change the currency symbol by going to "Control Panel -> Regional and Language Options" and under "Standards and formats" tab select your country from the drop-down list, then click on "Apply" button.

In Windows Vista you can change the currency symbol by going to "Control Panel -> Clock, Language and Region -> Regional and Language Options" and under "Formats" tab select your country from the drop-down list, then click on "Apply" button.

You may need to restart the computer for the changes to take effect (only if the new currency is not visible in the program).


Back to top
   
How do I setup multiple workstations to use a common database ?

Smart1DCutting supports multiuser connections. By setting the database location to the same network drive on all workstations, you can have your data stored and accessed in one central location.
To change the database location select Options -> Settings from the main menu. Then choose the "Database" tab and click the "Browse" button to select the new location for the database. Please note that Smart1DCutting must be restarted after changing the database location.

Please refer to your operating system documentation for information about network drives.


Back to top
   
   

Specifications
Product Screenshots
Technical Support
F.A.Q.
How to try
Where to buy
License Upgrades
License Prolongation
Customer Care Center
Online Documentation
Affiliate / Reseller program
 
Sign Up to receive
New Features Notification